Description of first aid measures
inhalation ingestion
skin contact eye contact
Immediately remove affected person to fresh air. Seek medical attention.
Never give anything by mouth to an unconscious person. Do not induce vomiting. Do not induce vomiting. If vomiting occurs, the head should be kept low to prevent vomit from entering the lungs. Seek medical attention.
Immediately remove contaminated clothing and wash skin with soap and water. If unwell persists, seek medical advice.
Rinse immediately with plenty of water. Remove contact lenses and open eyelids. Continue flushing for at least 15 minutes and seek medical attention of ethanol msds

Most important symptoms and effects, both acute and delayed
inhalation
ingest
skin contact
eye contact
4.3. Indicates the need for immediate medical attention and special treatment
Notes to Physician No specific advice. In case of doubt, seek medical attention immediately.
fire extinguishing medium
Suitable Extinguishing Media Extinguish with alcohol resistant foam, carbon dioxide, dry chemical or water spray.
Improper fire extinguishing Do not use water jet as a fire extinguisher as this will spread the fire. media

Special hazards arising from the substance or mixture
specific hazard
hazardous combustion products
5.3. Advice for firefighters
Special protective equipment for firefighters
This product is highly flammable. Vapors may form explosive mixtures with air.
Thermal decomposition or combustion may release carbon oxides and other toxic gases or vapors.
Wear positive pressure self-contained breathing apparatus (SCBA) and suitable protective clothing.

Personal precautions, protective equipment and emergency procedures
Personal Notes
6.2. Environmental protection measures Environmental protection measures
Follow the safe handling precautions described in this safety data sheet. Provide adequate ventilation. Avoid breathing vapor and contact with skin and eyes. Smoking, sparks, flames or other sources of ignition are strictly prohibited near the spill. Take precautionary measures against electrostatic discharge.
Spills or uncontrolled discharges into waterways must be reported immediately to the Environment Agency or other appropriate regulatory authority.
6.3. Methods and material for containment and clean-up
Cleanup Methods Absorb spillage with non-flammable absorbent material. Collect and place in a suitable waste disposal container and seal securely. Use only non-sparking tools. Use explosion-proof type
Electronic equipment. See Section 13 for waste disposal.
6.4. Reference to other chapters