You put up the Setek WiFi extender, the lights are on, and the connection seems to be working, but you're not sure whether it's really doing what it should. You could still be having trouble with poor signals in certain sections of your house, or the speed might not seem appropriate. And now you're asking the most obvious question: "How do I know if my Setek extender is really working?"
It's a reasonable question. The fact that the item is plugged in and flashing LEDs fail to indicate the status of the device. Therefore, this tutorial shows you exactly how to check that your extender is doing its job: expanding your WiFi connection without pauses or dead zones.
Step 1: Look at the lights on the connection
Start with the basics. There are LED lights on every Setek extender that show you how it works. These lights are the primary feedback that you get about the working of your extender. Once you've set up your Setek WiFi extender, check the Signal or WiFi light:
• Solid light: The extender and your router are connected well and steadily. This is precisely what you need.
• Blinking light: The extender is either trying to connect or is having trouble keeping the connection.
• No light: The extender could not be getting a signal, or it might not be set up well.
A steady, non-blinking WiFi signal indicator signifies that your extender is successfully picking up the router's signal and extending to your devices.
Step 2: Check the strength of the WiFi in places where it doesn't work.
The primary job of a WiFi extender is to address weak regions. Go to the room or region where you had no WiFi network prior. Connect to the extended network with your phone, tablet, or laptop. It generally has a name that ends with "_EXT," like HomeWiFi_EXT.
After you connect, do a simple internet speed test or watch a video. If items are loading swiftly and without any problems, that's a good indicator that the extender has started working properly.
If the connection stops, buffers too much, or is taking too long to load, there may have been a problem with the Setek WiFi extender setup, or you may need to move it.
Step 3: Check the speeds with and without the extender
To be confident that your extender is working, compare the results before and after. Here's an easy way to do it:
Without the extender on, go to a part of your house where the WiFi is poor. Check the speed.
Now connect to the expanded network again and plug in the extender.
Run the speed test again.
You will notice a big difference in how fast you can download and upload. Check where the extender is if the outcomes are the same or worse. The extender is to be placed near to the router so that it can get a strong signal. If it is too far away, it can't repeat what it doesn't get.
You don't need any tech skills for this setup; you only need to be able to see. It's one of the easiest methods to check if your Setek WiFi extender setup is working well.
Step 4: Check to see whether the device is connected
If devices are automatically connecting to the expanded network and are stable, this is another evidence that your extender is operating well.
Check the linked network on your phone or laptop's WiFi settings. You want the one with the "_EXT" designation and a prominent signal bar. The gadget is now utilizing the extender instead of trying to connect to a router that is far away.
You can also try out more than one gadget. Go about your house and switch between the original and expanded networks to check which one works best for each gadget. If your Setek WiFi extender setup is in excellent condition, you will be able to transit between networks easily.
Step 5: Check the Admin Panel for More Information
You can usually get into the admin panel of a Setek extender by typing 192.168.10.1 into your browser. You can view additional technical information when you log in, which is usually done using the username and password "admin/admin":
Strength of the signal from the primary router
How many devices are linked
Use of bandwidth
If you detect strong signal levels and active connections, you may be sure that the extender is working as it should.
In conclusion
Your WiFi extender may not be helpful even when it's plugged in. The actual test is how well it works: better signal where it used to be poor, consistent connections, quicker speeds, and more dependable streaming or surfing.
You can be sure that your Setek WiFi extender setup is functioning if you check the lights, test the dead zones, look at the speed gains, and make sure the connections are working. You don't need to know a lot about technology to perform these tasks.
Don't be afraid to move the extender or set it up from fresh if anything doesn't feel right. If you set up your extender correctly, it may make your overall internet experience smoother, more dependable, and a lot less annoying.
FAQs
1. What if the extender is plugged in but the signal is still weak?
Try putting it closer to the main router. For the extender to work well, it needs a strong signal. For things to work properly, the signal has to be strong.
2. Do I have to always be connected to the _EXT network?
Yes, particularly in places that are far away from your primary router. Your devices should immediately connect to the strongest network, even the extended one.
3. What should I do if the setup doesn't appear to be working?
You may either restart the extender or conduct a factory reset by holding the reset button down for ten seconds. After that, start the process of setting up the Setek WiFi extender again.
4. Will I be able to use the extender with other routers in the future?
Of course. Simply reset it and set it up again using the WiFi network of your new router. It works with almost all conventional routers that are available.
Comments
0 comment